有大大可以幫忙一下嘛?操作到這兒後...就跳出DOS視窗了...
======================================
======= Acer Iconia Toolkit v0.7.4 =======
Which device do you have?
[1] Acer Iconia B1-A71
[2] Acer Iconia A1-810 / A1-811
[3] Acer Iconia B1-710 / B1-A710
[Q] Quit
Enter a selection: 2
======= Acer Iconia A1-810 / A1-811 Toolkit v0.7.4 =======
What do you want to do?
[1] Root
[2] Unroot
[3] Internal 2 External (needs root)
[4] Odex (needs root)
[Q] Quit
Enter a selection: 1
================== Root =================
Before we can start, please do following:
1. Make sure drivers for your Acer Iconia A1-810 / A1-811 are installed, you can
find them here: http://goo.gl/i56Gn
2. Plug-In your Acer Iconia A1-810 / A1-811 into this PC.
3. Enable USB Debugging Mode by going into Settings -> Developer Tools.
4. Put prerooted system.img.gz into folder: system_image of this toolkit.
5. Keep your device plugged in until it"s finally rooted, or this procedure is a
borted!
6. !!! UNPLUG ALL OTHER DEVICES!!!
If you sucessfully applied the steps above, we can now start.
You can always abort by pressing Ctrl+C
[ENTER] Continue
[Q] Quit
Enter a selection:
Trying to establish ADB Connection...
ADB Connection to your Acer Iconia A1-810 / A1-811 successful.
Copying Busybox to your Acer Iconia A1-810 / A1-811.
3370 KB/s (1062992 bytes in 0.308s)
Successfully copied Busybox to your Acer Iconia A1-810 / A1-811.
Starting Telnet server on your Acer Iconia A1-810 / A1-811.
Please turn on your Acer Iconia A1-810 / A1-811 now and unlock the screen. Only
hit ENTER when the screen of your Acer Iconia A1-810 / A1-811 is unlocked!
[ENTER] Continue
[Q] Quit
Enter a selection:
Don"t touch the screen! I"m taking it over now ;-)
Successfully started Telnet server on your Acer Iconia A1-810 / A1-811.
Checking firmware version.
598 KB/s (3680 bytes in 0.006s)
Firmware version "RV02RC22" installed. MAKE SURE YOUR system.img.gz IN system_im
age FOLDER IS OF THE SAME VERSION, OTHERWISE YOU GET A BOOTLOOP!
Copying rooted system.img.gz to your Acer Iconia A1-810 / A1-811 (This will take
1-2 minutes)...
[ENTER] Continue
[Q] Quit
Enter a selection:
failed to copy "system_imagesystem.img.gz" to "/cache/system.img.gz": Permissio
n denied
Failed to copy system.img.gz. Make sure the folder "system_image" of this toolki
t contains a system.img.gz suiting to your installed firmware.
If you keep getting this error, try to run toolkit with -d or --debug parameter
Press Enter to leave Application... |
鑽石
碎鑽
金豆
樓主
